Altera High-Speed Development Kit, Stratix GX Edition Manuel d'utilisateur télécharger pdf (Page 40)

4–12 Quartus II Version 3.0 Altera Corporation

Stratix GX SFP XCVR Loopback High-Speed Development Kit, Stratix GX Edition User Guide

6. Press the start pushbutton switch (Stratix_GX_PB_0).

7. Inject an error by pressing Stratix_GX_PB_2 (S4) once. The

Stratix GX 7-segment display (D9) shows 01 and Stratix GX LED5

illuminates.

8. Inject two more errors by pressing S4 twice. D9 displays 03.

Stratix GX SFP

XCVR Loopback

The Stratix GX SFP XCVR loopback test design tests the SFP XCVR

signals at up to 2.488 Gbps using the provided SFP XCVR loopback cards.

Required Hardware & Software

This test requires the following hardware and software:

■ SFP XCVR loopback cards

■ ATX power supply

Test Setup

To set up the test, perform the following steps.

1. Remove power from the board.

2. Insert the SFP loopback cards on the board as shown in Figure 4–6.

3. Attach the SFP loopback card (labeled J3 on the card) to the SFP

transceiver connectors at J54, J64, J45, and J38 as shown in

Figure 4–7.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 139 140

Pas de commentaire

Altera High-Speed Development Kit, Stratix GX Edition Manuel d'utilisateur Page 40