
Chapter 2: Board Components 2–35
General User Interfaces
May 2013 Altera Corporation Stratix III 3SL150 Development Board
Reference Manual
Figure 2–11 shows a mechanical diagram of the LCD display. The 14-pin receptacle
mounts underneath the display in the holes to the left.
Table 2–34 lists the character LCD display component reference and manufacturing
information.
Graphics LCD
The board contains a 30-pin, fine-pitch connector to interface directly to a 128 × 64 dot
matrix graphics LCD display via a flex-cable that is soldered to the display itself. The
display is an Optrex, part number F-51852GNFQJ-LB-AIN (blue pixels) or
F-51852GNFQJ-LB-CAN (green pixels). The pin-out of this interface connector is
compatible with a variety of displays.
f For the graphics LCD data sheet and related documentation, visit www.optrex.com.
Table 2–35 lists the graphics LCD pin name, description, and type. Signal name and
direction are relative to the Stratix III FPGA.
Figure 2–11. LCD Display Dimensions
15.24 [0.600]
(P2.54 x 7)
24.00 [0.945]
30.00 0.50
[1.18 0.020]
24.00 [0.945]
16.00 [0.630]
V.A.
2.54 [0.100]
13 14
11.50 [0.453]
3.00 [0.118]
7.38 [0.291]
REF.
1 2
A
K
2.00 [0.079]
+
+
+
+
+
+
85.00 0.50 [3.346 0.020]
+
_
+
_
71.20 [2.803]
81.00 [3.189]
66.00 [2.598] V.A.
56.21 [2.213]
4.325 [1.703]
14 - 1.00 [ 0.039]
(PAD 1.80 [ 0.071])
Ο
Ο
Ο
Ο
1.00 [ 0.039]
(5 PLS.)
Ο
Ο
2.50 [ 0.098]
(4 PLS.)
Ο
Ο
+
_
+
_
Table 2–34. Character LCD Display Component Reference and Manufacturing Information
Board
Reference
Description Manufacturer
Manufacturing
Part Number
Manufacturer
Website
J22
2 × 7 pin, 100 mil, vertical header Samtec TSM-107-01-G-DV www.samtec.com
2 × 16 character display, 5 × 8 dot matrix Lumex Inc. LCM-S01602DSR/C www.lumex.com
Table 2–35. Graphics LCD Header (J24) (Part 1 of 2)
Board
Reference
Description
Schematic
Signal Name
I/O
Standard
Stratix III
Pin Number
J24 pin 6 LCD data bus bit 0
OLED_DATA0
2.5 V AB31
J24 pin 7 LCD data bus bit 1
OLED_DATA1
2.5 V AG32
J24 pin 8 LCD data bus bit 2
OLED_DATA2
2.5 V AB27
J24 pin 9 LCD data bus bit 3
OLED_DATA3
2.5 V AC32
Commentaires sur ces manuels