Altera Cyclone V GT FPGA Development Board Manuel d'utilisateur télécharger pdf (Page 10)

2–2 Chapter 2: Board Components

Board Overview

Cyclone V GT FPGA Development Board September 2014 Altera Corporation

Reference Manual

Board Overview

This section provides an overview of the Cyclone V GT FPGA development board,

including an annotated board image and component descriptions. Figure 2–1 shows

an overview of the board features.

Table 2–1 describes the components and lists their corresponding board references.

Figure 2–1. Overview of the Cyclone V GT FPGA Development Board Features

Table 2–1. Board Components (Part 1 of 4)

Board Reference Type Description

Featured Devices

U13 FPGA Cyclone V GT, 5CGTFD9E5F35C7N, 1152-pin FBGA.

U32 CPLD MAX V CPLD, 5M2210ZF256C4N, 256-pin FBGA.

Configuration, Status, and Setup Elements

J13 JTAG chain header

Provides access to the JTAG chain and disables the embedded

USB-Blaster II when using an external USB-Blaster cable.

SW3

JTAG chain control or

PCI Express DIP switch

Remove or include devices in the active JTAG chain. Also controls the

PCI Express lane width by connecting the

prsnt

pins together on the

PCI Express edge connector.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 65 66

Pas de commentaire

Altera Cyclone V GT FPGA Development Board Manuel d'utilisateur Page 10