Altera Arria V GX FPGA Manuel d'utilisateur télécharger pdf (Page 18)

4–4 Chapter 4: Development Board Setup

Factory Default Switch and Jumper Settings

Arria V GX FPGA Development Kit July 2012 Altera Corporation

User Guide

3. Set DIP switch bank (SW6) to match Table 4–3 and Figure 4–2.

4. Set DIP switch bank (SW7) to match Table 4–4 and Figure 4–2.

Table 4–3. SW6 JTAG Dip Switch Settings

Switch

Board

Label

Function

Default

Position

1— — OFF

2 HSMA_JTAG_EN

Switch 2 has the following options:

■ ON, (logical 0) = HCMC Port A not in JTAG chain.

■ OFF, (logical 1) = Include HCMC Port A in the

JTAG chain.

3 HSMB_JTAG_EN

Switch 3 has the following options:

■ ON, (logical 0) = HCMC Port B not in JTAG chain.

■ OFF, (logical 1) = Include HCMC Port B in the

JTAG chain.

4FMC_JTAG_EN

Switch 4 has the following options:

■ ON, (logical 0) = FMC connector not in JTAG

chain.

■ OFF, (logical 1) = Include FMC connector in the

JTAG chain.

Table 4–4. SW7 PCIe DIP Switch Settings

Switc

Board

Label

Function

Default

Position

PCIE_PRSNT2

n_x1

Switch 1 has the following options:

■ ON (0) = x1 presence detect is enabled.

■ OFF (1) = x1 presence detect is disabled.

PCIE_PRSNT2

n_x4

Switch 2 has the following options:

■ ON (0) = x4 presence detect is enabled.

■ OFF (1) = x4 presence detect is disabled.

PCIE_PRSNT2

n_x8

Switch 3 has the following options:

■ ON (0) = x8 presence detect is enabled.

■ OFF (1) = x8 presence detect is disabled.

4— — OFF

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Altera Arria V GX FPGA Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Altera Arria V GX FPGA